EVOLUTION GUN WORKS Savage Round Back Long Action Picatinny Rail 0 MOA Scope Mount (41100)

Features of EVOLUTION GUN WORKS Sav Rnd Back LA 0 MOA Mount 41100

• Works with any long action round back Savage rifle with an ejection port
• Does NOT fit the 212
• Machined from Domestic 6061 T6 Extruded Aluminum
• Comes standard with a bevel on both sides making it ambidextrous
• Hex head screws and wrench provided
• 4.630 in. Center Spread
• 7.458 in. Overall Length
• 0 MOA for shooting 0-500 yards
• Matte Black Finish

Product Info for EVOLUTION GUN WORKS Sav Rnd Back LA 0 MOA Mount 41100

Due to the change in which receivers have #6 and #8 screws from Savage, we recommend you remove and measure one of the screws prior to purchasing EGW scope mount.
This will ensure that you receive the correct screws necessary for your specific application.

Rifles requiring #8 screws (please check your individual rifle to be sure):
– 10/110 BA Stealth
– 10/110 Stealth Evolution
– 110 Scout
– 110 Wolverine
– 10 GRS
– 110 Tactical
– 110 Tactical LH
– 110 Tactical Desert

Screw Diameters:
#6 Screws – .013″ diameter
#8 Screws – .016″ diameter

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.
Savages without an accu-trigger will require our flat back mount.

The middle spread is the distance between the two middle holes, center to center, on your receiver.
This mount is available in 0 MOA. We recommend 0 MOA, if shooting 0-500 yards.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.
EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).

GritrOutdoors is an authorized Evolution Gun Works dealer